HF tactical radio R-1150

Details
Category: Communication means
Hits: 6262

HF tactical radio R-1150 is designed to provide digital communication in stationary and field combat communication systems. R-1150 can operate in stationary signal centers and combat communication systems of different levels.

Radio P-1150 supports the work of the digital network technology to transmit data over IP. This allows the use of the radio channel gateway IP data transfer protocol, and thus to combine network segments into a single information space, and ensuring the delivery of data between any of the subscribers of the global network.

In the basic configuration is completed amplifier at 150 watts. Depending on customer requirements can be completed amps at 400 W and 1 kW.

Specifications

  • frequency range:                          1,5 MHz ÷ 30 MHz;
  • modes of operation:                      - simplex, - half-duplex, - FHSS, - ALE;
  • number of programmed channels :    399;
  • step of frequency setting:              10Hz;
  • types of modulation:                     A1A, J3E, B8E, A3E, F3E  (F1B in FSK –modem mode);
  • interfaces:    
    •  - audio (600 ohm, 0 dbm)
    •  - data (RS-232, RS-422, RS-423)
    •  - control (RS-232, RS-422, RS-423,  RS-485and  Ethernet);
  • output power :  (150±30) W; option 400 W & 1 KW

R-1150 has performance check test, which starts automatically when power is on or upon operator’s command.

R-1150 provides the following ways of control:

  • local (using  control board); 
  • remote (from computer at RS-232, RS-422, RS-423 or RS-485 interfaces);
  • remote (from computer through Ethernet).

Operations in ALE mode::

  • channel scanning ;
  • channel sounding;
  • individual call;
  • net call;
  • group call;
  • specific call;
  • automatic display of message.

R-1150 provides digital data transfer with the following rates for paths’ types:

  • FSK: 50, 75, 100, 150, 300, 600 bs;
  • STANAG 4285 coded: 75, 150, 300, 600, 1200, 2400 bps;
  • STANAG 4285 uncoded: 1200, 2400, 3600 bps;
  • STANAG 4529 coded: 75, 150, 300, 600, 1200 bps;
  • STANAG 4529 uncoded: 600, 1200, 1800, bps;
  • STANAG 4539 coded: 75, 150, 300, 600, 1200, 2400, 3200, 4800, 6400, 8000, 9600 bps;
  • STANAG 4539 uncoded: 12800 bps;
  • STANAG 4415: 75 bps;
  • MIL-STD-188-110B App. C coded: 3200, 4800, 6400, 8000, 9600 bps;
  • MIL-STD-188-110B App. C uncoded: 12800 bps;
  • MIL-STD-188-110B: 75, 150, 300, 600, 1200, 2400, 4800 bps;
  • MIL-STD-188-110B App. F: 9600, 12800, 16000, 19200 bps.

R-1150 provides voice communication with the following parameters:

  • vocoder standard: STANAG 4198;
  • transfer standard: MIL-STD-188-110B App. B;
  • rate : 2400 bps.

Parameters of operation in FHSS mode:

  • number of frequency hops:                      8,8 (8) hps;
  • length of frequency hops  :                     112,5 m/sec;
  • maximum data transfer rate:                    2400 bps.

R-1150 operates in the following climatic conditions:

  • temperature of ambient environment is in the range from 253 to 328K  (from -20̊ to +55̊ C)
  • relative humidity is not more than 98% under the temperature of 298K (25̊ C)
  • air pressure is from 60 кPa to 113 кPа (from 450 to 850 mm.m.c).

Resistance to environmental conditions is according to group 1.8 execution UXL of the State Standard В 20.39.304-76.

Power supply:

  • AC: power source - separate current conversion unit of AC 220V, 50Hz into DC 27V.
  • DC: 22…30V, protected from false polarity connection. Rating value - 27 V.

R-1150 can interoperate with:

  • STANAG 4203 HF tactical radio through radio channel;
  • computers with RS-232, , RS-422, RS-423, RS-485 and  Ethernet - interfaces through control circuits;
  • data transfer equipment with RS-232, RS-422 и RS-423- interfaces through wire data links;
  • equipment of different types through wire voice channels.