Details

Written by Super User

Category: Equipment for LAN

Hits: 5330

Unified tactical computers with specialized software, serially produced and used for organization of automated control of subdivisions on the tactical command level during preparation and conducting of operations.

Tactical terminal A-9620 – is fully functional computer, made with modern elements. On the computer can be installed specialized software for automated working places of any on the tactical command level staff, from brigade commander (in command vehicles) till the commanders of gun, tank or armored vehicle.

                                        Base technical characteristics

• Processor:                                                                      Intel® Pentium® M P745(1.8GHz), OMB RAM
• ROM:                                                                             DDR 1GB
• HDD:                                                                              Compact Flash 8Gb
• Video adapter:                                                                i855GME
• Display:                                                                         10.4" 18bit color, 800x600 TFT, (heating, sensor screen.)
• Keyboard:                                                                      Build in the case  (around display).
• Number of ports RS-232/RS-485/RS-422:                          till     10 pieces.
• Number of ports USB v1.1 и v.2.0                                     till  6 pieces.
• Inputs S-video + stereo audio:                                          till     2 pieces.
• Number of ports Ethernet 10/100 BASE-TX:                       till     1 piece.
• FONET interface (linear interface, ear phones):                  till     1 piece.
• Output to  VGA display:                                                   till     1 piece.
• Power supply  DC:                                                          18-36 V.
• Dimensions (LxWxH) mm:                                               285 x 232 x 67
• Weight, kg.:                                                                    4

Details

Written by Super User

Category: Equipment for LAN

Hits: 5309

Digital Cable Modem М-101 is designed to build a high -speed duplex digital link between remote devices with Е1 interface. The specific feature of the modem is in its ability to pass two Е1flows through one SHDSL -linear interface.  SHDSL -linear interface complies with ІTU-T G.991.2.bіs and uses ТСРАМ - Trellіs-Coded Pulse Amplіtude Modulatіon coding set for transmission.

Modem is equipped with two SHDSL- ports, two E1-ports, and one port with RS-232 interface.

RS-232-port is used to control the modem. External terminal (PC) is connected to the port.

SHDSL-port operates in plesiochronous mode. The Maximum length of  SHDSL-line is  decreasing during the increasing of data transfer rate.

Modem is resistant to man-maid noise, has complete galvanic isolation with the link and power system.

Modem operates in the following climatic conditions:

• temperature of ambient environment is in the range from 238 to 323K  (from -35⁰ to +50⁰ C)
• relative humidity is not more than 98% under the temperature of 298K (25⁰ C)
• air pressure is from 60 кPa to 113 кPа (from 450 to 850 mm.m.c).

Weight of fully completed modem is not more 7 kg;

Dimensions:

• Length – 482 mm;
• Width – 349 mm;
• Height – 196 mm.

Specifications:

Power supply:

• AC: 187…242 V, 43…65 Hz. Rating value is 220V, 50 Hz;
• DC: 18…36 V protected from false polarity connection. Rating value is 27 V.

Details

Written by Super User

Category: Equipment for LAN

Hits: 5702

Digital Cable Modem Ethernet М-1201 is designed to construct a high-speed duplex digital link between remote devices with   Ethernet-interface.

Modem includes SHDSL-port, 4 Ethernet 10BASE-T/100Base-TX ports and a port with RS-232-interface.

Linear interface SHDSL complies with ІTU-T G.991.2.bіs recommendations and is used for transmitting ТСРАМ coding sets. Modem can multiplex two SHDSL channels in one logical channel (four-wire mode) to increase ranging at the cost of decrease in speed on the channel without decrease of total speed.

RS-232-port is used to control the modem. External terminal (PC) is connected to the port.

Modem can be controlled with control keys on the front panel. ЕОС-channel is used for remote monitoring of the  modem’s state. Analog phone set (TA-01) with local battery can be connected to the modem to organize voice engineering channel between modems.

Modem provides remote power supply for regenerators. The mode of streamline current feed is implemented in the modem to protect conductors and connectors of the linear side from premature corrosion.

Modem is resistant to man-maid noise, has complete galvanic isolation with the link and power system.

Modem operates in the following climatic conditions:

• temperature of ambient environment is in the range from 238 to 323K  (from -35⁰ to +50⁰ C)
• relative humidity is not more than 98% under the temperature of 298K (25⁰ C)
• air pressure is from 60 кPa to 113 кPа (from 450 to 850 mm.m.c).

Weight of fully completed modem is not more 8 kg;

Dimensions:

• Length – 482 mm;
• Width – 349 mm;
• Height – 106 mm.

Specifications:

SHDSL -interface parameters

     Interface parameters of SHDSL-port are according to the ІTU-T G.991.2.bіs recommendations.

Number of channels:                               1

Connection type:                                     point-to-point

Operation mode:                               two-wire, four-wire

Cable type:                                             P-296, P-274М

Linear code:                                              TCPAM

Data transfer rate range, kBps:           from 192 to 11392

Change of data transfer rate step, kBps:  64

Link mode:                                                     full-duplex

-          Ethernet interface parameters:

Parameters of Ethernet -interface are according to the ІEEE 802.3u (10BASE-T/ 100BASE-TX) recommendations.

Number of ports:                                          4

Support:                                                   AUTO-MDIX for 10/100 MB

Ethernet IEEE 802.3x flow control for full- duplex mode

Вack pressure flow control for half- duplex mode

-          Embedded 10/100MB switch:

     up to 4 K MAC addresses;

     table with MAC addresses supports unicast and multicast MAC addresses, as well as IP-multicast addresses;

     Ethernet multicasting, broadcasting and flooding control support.

-          VLAN functions:

port-based VLAN;

IEEE 802.1Q tag-based VLAN, up to 4 K VLANs;

support of the shared VLAN learning (SVL) and independent VLAN learning (IVL) of MAC addresses modes.

Modem is available to any network protocols.

-            RS232-interface parameters

Transfer rate, bps:                                                       115200

Protocol:                                                                        8-N-1

Flow control:                                                                 no        

Power supply:

• AC from 187 to 242V, with frequency from 43 to 65 Hz. Rating value 220V, 50 Hz;
• DC from 18 до 36V protected from false polarity connection. Rating value 27 V.

Details

Written by Super User

Category: Equipment for LAN

Hits: 5481

Ethernet switch А – 101 is designed to provide data packet-switching exchange between officials’ workstations and to integrate them in the Local Area Network (LAN),  based on 10/100 Ethernet (10Base-T and 100Base-TX). It can be installed both in standard rack of communication utility shed as well as at armored vehicle.

Switch operates in the following climatic conditions:

• temperature of ambient environment is in the range from 238 to 323K  (from -35⁰ to +50⁰ C)
• relative humidity is not more than 98% under the temperature of 298K (25⁰ C)
• air pressure is from 60 кPa to 113 кPа (from 450 to 850 mm. m. c).

Weight of fully completed switch is not more 30 kg

Dimensions:

• Length – 490 mm;
• Width – 490 mm;
• Height – 200 mm.

Specifications:

Switch has 16 physically independent ports for 10/100 Ethernet network connection. It saves up to 1024 ultimate Ethernet packets of maximum size (1536 bytes).

Switch provides the following:

• automatic transfer rate identification – 10 or 100Mbps;
• automatic transfer mode  identification – full duplex or half-duplex;
• automatic cable connection type   identification – direct connection or cross connection;
• formation of virtual networks, based on VLAN, which is done according to IEEE 802.1Q requirements;
• data filtration at MAC addresses;
• ports are assigned with  predefined MAC addresses;
• frame flow control, considering Qo ports and/or their priorities;

Switch has the possibility to create two groups of trunk connections between switches up to four ports per group.

Mean-time-between-failures is not less 10000 hours.

Power supply:

• AC: 115…260 V, 43…65 Hz. Rating value is 220V, 50 Hz;
• DC: 18…36 V protected from false polarity connection. Rating value is 27 V.